Service & Cable Location

  • C-Scope 20m Plastic Pipe Tracer 33kHz

    C-Scope 20m Plastic Pipe Tracer 33kHz

    The unique C.Scope Plastic Pipe Tracers are designed specifically to allow SMALL diameter, non-metallic pipes to be traced. C.Scope Plastic Pipe Tracers are the smallest diameter product on the market and can be successfully inserted into pipes when...

    £195.00
    Add to Cart
  • C-Scope 50m Plastic Pipe Tracer 33kHz

    C-Scope 50m Plastic Pipe Tracer 33kHz

    The unique C.Scope Plastic Pipe Tracers are designed specifically to allow SMALL diameter, non-metallic pipes to be traced. C.Scope Plastic Pipe Tracers are the smallest diameter product on the market and can be successfully inserted into pipes when...

    £450.00
    Add to Cart
  • C-Scope 80m Flexible Tracer with Sonde C-Scope 80m Flexible Tracer with Sonde

    C-Scope 80m Flexible Tracer with Sonde

    Compatible with Radiodetection & Leica Products The Flexible Tracer is highly effective at locating and tracing the route of small diameter, non-metallic ducts, pipes, sewers and drains. When used with any C.Scope Cable Locator and Signal...

    £465.00
    Add to Cart
  • C-Scope BT Rodding Oscillator 33kHz

    C-Scope BT Rodding Oscillator 33kHz

    The C.Scope 33KHz Duct Sonde is a small battery powered transmitter which can be screwed onto the end of a duct rod and inserted and fed into a a duct or conduit. The direction of the duct or conduit can then be traced by a C.Scope locator set to...

    £198.00
    Add to Cart
  • C-Scope CS880 Buried Cover Locator C-Scope CS880 Buried Cover Locator

    C-Scope CS880 Buried Cover Locator

    The CS880 Metal Cover Locator detects lost or hidden metal objects such as manhole covers and stopcock covers. The CS880 Metal Cover Locator is a purpose-built solution to the problem of finding lost or hidden metal objects in the ground. The CS880...

    £140.00
    Add to Cart
  • C-Scope CXL3 Standard CAT C-Scope CXL3 Standard CAT

    C-Scope CXL3 Standard CAT

    Frequencies: 33kHz Depth: No Warranty: 3 Years Datalogging: No GPS Datalogging: No The C.Scope CXL3 Cable Avoidance Tool is a robust and affordable industry standard locator used to detect buried pipes and cables prior to excavation. Hitting and...

    £395.00
    Add to Cart
  • C-Scope Duct Sonde 33kHz

    C-Scope Duct Sonde 33kHz

    The C.Scope 33KHz Duct Sonde is a small battery powered transmitter which can be screwed onto the end of a duct rod and inserted and fed into a a duct or conduit. The direction of the duct or conduit can then be traced by a C.Scope locator set to...

    £200.00
    Add to Cart
  • C-Scope DXL3 Standard CAT - Depth C-Scope DXL3 Standard CAT - Depth

    C-Scope DXL3 Standard CAT - Depth

    Frequencies: 33kHz Depth: Yes Warranty: 3 Years Datalogging: No GPS Datalogging: No The C.Scope CXL3 Cable Avoidance Tool is a robust and affordable industry standard locator used to detect buried pipes and cables prior to excavation. Hitting and...

    £475.00
    Add to Cart
  • C-Scope General Purpose Sonde 33kHz

    C-Scope General Purpose Sonde 33kHz

    A C.Scope 33kHz General Purpose Sonde is a small battery powered transmitter hermetically sealed in a robust torpedo shaped case which which can be screwed onto the end of a drain rod and fed into a pipe. The pipe direction can be then be traced using a...

    £165.00
    Add to Cart
  • C-Scope General Purpose Sonde 8kHz

    C-Scope General Purpose Sonde 8kHz

    A C.Scope 8kHz General Purpose Sonde is a small battery powered transmitter hermetically sealed in a robust torpedo shaped case which which can be screwed onto the end of a drain rod and fed into a pipe. The pipe direction can be then be traced using a C...

    £165.00
    Add to Cart
  • C-Scope Live Plug Connector

    C-Scope Live Plug Connector

    Genny live plug connector (LPC) is used to easily apply a Genny signal to a street distribution cable using a standard mains socket. Compatible with Radiodetection, C-Scope, Leica & Cable Detection.

    £95.00
    Add to Cart
  • C-Scope M-Scan Magnetometer C-Scope M-Scan Magnetometer

    C-Scope M-Scan Magnetometer

    The M-Scan is a battery powered Locator manufactured in heavy-duty, high-impact ABS with a robust aluminium sensor tube. It has a large, easy-to-read LCD, showing battery level, signal strength and polarity indication backed up with a clear audible...

    £420.00
    Add to Cart
  • C-Scope Metal  Pipe Sonde 512Hz

    C-Scope Metal Pipe Sonde 512Hz

    To address the problems of detecting the position of a blockage or other relevant feature within a metal pipe, the C.Scope Metal Pipe Sonde is specially designed with a low frequency signal output that is capable of being transmitted through the metal...

    £190.00
    Add to Cart
  • C-Scope Metal  Pipe Sonde 640Hz

    C-Scope Metal Pipe Sonde 640Hz

    To address the problems of detecting the position of a blockage or other relevant feature within a metal pipe, the C.Scope Metal Pipe Sonde is specially designed with a low frequency signal output that is capable of being transmitted through the metal...

    £190.00
    Add to Cart
  • C-Scope SGA3 Standard Genny 33kHz C-Scope SGA3 Standard Genny 33kHz

    C-Scope SGA3 Standard Genny 33kHz

    Frequencies: 33kHz Warranty: 3 Years Datalogging: No The C.Scope SGA3 is an affordable Signal Generator designed for use alongside a CXL3 or DXL3 Cable Avoidance Tool to make the task of cable avoidance far more effective. The C.Scope SGA3 will...

    £395.00
    Add to Cart
  • C-Scope SGA4 Standard Genny 33+131kHz C-Scope SGA4 Standard Genny 33+131kHz

    C-Scope SGA4 Standard Genny 33+131kHz

    Frequencies: 33 + 131kHz Warranty: 3 Years Datalogging: No The C.Scope SGA4 is an affordable Signal Generator designed for use alongside a CXL4 or DXL4 Cable Avoidance Tool. It enables significantly more underground utilities to be detected including...

    £425.00
    Add to Cart
  • C-Scope Signal Clamp 4" 100mm

    C-Scope Signal Clamp 4" 100mm

    This clamp is used to apply a Genny signal to a specific cable or pipe. This is particularly useful where direct connection is not possible, or on live cables when these cannot be de-energized.Available in 50mm (2"), 100mm (4"), 130mm (5") and 215mm (8...

    £195.00
    Add to Cart
  • Direct Connection Leads

    Direct Connection Leads

    This is used for applying a Genny signal directly on to utilities. Compatible with Radiodetection (CAT RANGE), Leica, C-Scope and Cable Detection Signal Generators

    £42.00
    Add to Cart
  • Genny Connection Kit

    Genny Connection Kit

    Connection Kit including direct connection lead, an earth extension lead, an earth stake and a high-strength magnet. Compatible with Radiodetection (CAT RANGE), Leica, C-Scope and Cable Detection Signal Generators

    £76.00
    Add to Cart
  • Pipe Dart 6mm 120m Duct Rod

    Pipe Dart 6mm 120m Duct Rod

    The PipeDart 'Ferret' cobra rodding system gives a compact and labour saving solution for cable installation whether installing cables in ducts, threading draw ropes through pipes or when using with a Sonde transmitter for locating pipes and blockages...

    £250.00
    Add to Cart
  • Pipe Dart 6mm 80m Duct Rod

    Pipe Dart 6mm 80m Duct Rod

    The PipeDart 'Ferret' cobra rodding system gives a compact and labour saving solution for cable installation whether installing cables in ducts, threading draw ropes through pipes or when using with a Sonde transmitter for locating pipes and blockages...

    £205.00
    Add to Cart
  • Pipe Dart 9mm 300m Duct Rod

    Pipe Dart 9mm 300m Duct Rod

    The PipeDart Large frame cobra rodding system gives a compact and labour saving solution for cable installation whether installing cables in ducts, threading draw ropes through pipes or when using with a Sonde transmitter for locating pipes and blockages...

    £595.00
    Add to Cart
  • Pipe Dart Mini 4.5mm 80m Duct Rod

    Pipe Dart Mini 4.5mm 80m Duct Rod

    A tough compact flexi duct rod system which solves the problems associated with cabling over longer distances. The PipeDart is a frame mounted cable pulling system manufactured from 4mm Diameter Composite Fibreglass Rod, also known as Cobra Rod or Duct...

    £205.00
    Add to Cart
  • Radiodetection CAT 4

    Radiodetection CAT 4

    The C.A.T4™ and Genny4™ range represents the latest evolution of the highly popular Cable Avoidance Tools, as pioneered by Radiodetection, enabling operators to work more efficiently, more safely and to manage their C.A.T4 and Genny4 fleet...

    £410.00
    Add to Cart
  • Radiodetection CAT 4+ Depth

    Radiodetection CAT 4+ Depth

    The C.A.T4™ and Genny4™ range represents the latest evolution of the highly popular Cable Avoidance Tools, as pioneered by Radiodetection, enabling operators to work more efficiently, more safely and to manage their C.A.T4 and Genny4 fleet...

    £555.00
    Add to Cart
  • Radiodetection eCAT 4 - Data Logging

    Radiodetection eCAT 4 - Data Logging

    The C.A.T4™ and Genny4™ range represents the latest evolution of the highly popular Cable Avoidance Tools, as pioneered by Radiodetection, enabling operators to work more efficiently, more safely and to manage their C.A.T4 and Genny4 fleet...

    £595.00
    Add to Cart
  • Radiodetection eCAT 4+ Data Logging & Depth

    Radiodetection eCAT 4+ Data Logging & Depth

    The C.A.T4™ and Genny4™ range represents the latest evolution of the highly popular Cable Avoidance Tools, as pioneered by Radiodetection, enabling operators to work more efficiently, more safely and to manage their C.A.T4 and Genny4 fleet...

    £675.00
    Add to Cart
  • Radiodetection Genny 4 Radiodetection Genny 4

    Radiodetection Genny 4

    The Genny 4, with a new integrated logic design, provides a class-first simultaneous dual-frequency signal output design. Alongside the familiar 33kHz locate signal for general purpose locates, the Genny 4 transmits a second frequency designed to...

    £495.00
    Add to Cart
  • Radiodetection Sewer Sonde 33 kHz

    Radiodetection Sewer Sonde 33 kHz

    A self-contained, battery-operated sonde, measuring 64mm x 168mm (2.51" x 6.61"). It can be connected to a Flexrod for locating pipes and ducting etc. It transmits on 33kHz and can be normally located to a maximum depth of 8m (26').

    £340.00
    Add to Cart
  • Radiodetection Signal Clamp 2" 50mm

    Radiodetection Signal Clamp 2" 50mm

    This clamp is used to apply a Genny signal to a specific cable or pipe. This is particularly useful where direct connection is not possible, or on live cables when these cannot be de-energized.Available in 50mm (2"), 100mm (4"), 130mm (5") and 215mm (8...

    £204.00
    Add to Cart
  • Radiodetection Signal Clamp 5" 130mm

    Radiodetection Signal Clamp 5" 130mm

    This clamp is used to apply a Genny signal to a specific cable or pipe. This is particularly useful where direct connection is not possible, or on live cables when these cannot be de-energized.Available in 50mm (2"), 100mm (4"), 130mm (5") and 215mm (8...

    £266.00
    Add to Cart