Radiodetection CAT4+
The Radiodetection CAT4+ has all the same features as the CAT4 with added depth function allowing you to determine the depth of the cable.
The Radiodetection CAT4+ has four detection modes; power mode, radio mode, genny mode and avoidance mode which simultaneously detects power, radio and Genny.
The CAT4+ is network rail approved.
Aswell as the depth feature it has a signal overload warning. This will appear on the screen when the CAT4+ is used in areas where very large power signals are present. You are advised to lift the CAT4+ to bring it out of the overload condition or use the CAT+ in other locations.
And a dynamic overload protection function which filters out unwanted electrical noise commonly found in and around substations and surface mounted HV cables, these can have an adverse effect on the detection of buried cables.
The signal strength is displayed on the backlit LED screen via a bar graph, audio is also used via the speaker.
The CAT4+ is required a calibration every 12 months.
Radiodetection CAT4+ Specification
Operating temperature - 20°c - +50°c
IP Rating – IP54
Power – 2x D-cell alkaline batteries
Weight – 2.3kg
Depth Accuracy - ±10%
Depth range - -4m/7m sonde mode
Battery life – 4 hours continuous
Warranty – 1 year
Calibration
All our Radio detection products are calibrated before dispatch and are provided with a calibration certificate valid for 12 months.