Abtech AB15RT Fall Arrest Recovery Block

15m Fall Arrest device from the TORQ range. Designed to provide fall protection from falls from height. Anchored above the user, it gives the user a safe area of work. The retracting line pays in and out of the device as the user moves. In the event of a...

Abtech Confined Space Tripod & 15m Fall Arrest Block

Abtech T3 2 person confined space tripod and AB15RT fall arrest recovery block Supplied with service / inspection certificates

Abtech T3 2 Person Confined Space Tripod

The tripod is the basis of a confined space entry and rescue system giving a strong, stable, and portable anchorage point for fall arrest and recovery systems. One worker can carry and erect the sturdy but lightweight aluminium alloy Tripod.For tripod...

BW Gas Detector 12v Car Charger

BW gas monitor 12v Vehicle charger. Suitable for Micro Clip XT, XT II, XL, X3 and Gas Alert Quattro

BW Gas Detector Mains Charger

BW gas monitor mains charger. Suitable for Micro Clip XT, XT II, XL, X3 and Gas Alert Quattro

BW GasAlert Microclip XL Multi-Gas Detector

Offering affordable protection from up to four atmospheric hazards, the GasAlert MicroClip XL is incredibly slim, lightweight and easy to use. Available in a wide variety of configuration options, each with IntelliFlash to confirm detector...

C-Scope 20m Plastic Pipe Tracer 33kHz

The unique C.Scope Plastic Pipe Tracers are designed specifically to allow SMALL diameter, non-metallic pipes to be traced. C.Scope Plastic Pipe Tracers are the smallest diameter product on the market and can be successfully inserted into pipes when...

C-Scope 50m Plastic Pipe Tracer 33kHz

The unique C.Scope Plastic Pipe Tracers are designed specifically to allow SMALL diameter, non-metallic pipes to be traced. C.Scope Plastic Pipe Tracers are the smallest diameter product on the market and can be successfully inserted into pipes when...

C-Scope 80m Flexible Tracer with Sonde

Compatible with Radiodetection & Leica Products The Flexible Tracer is highly effective at locating and tracing the route of small diameter, non-metallic ducts, pipes, sewers and drains. When used with any C.Scope Cable Locator and Signal...

C-Scope BT Rodding Oscillator 33kHz

The C.Scope 33KHz Duct Sonde is a small battery powered transmitter which can be screwed onto the end of a duct rod and inserted and fed into a a duct or conduit. The direction of the duct or conduit can then be traced by a C.Scope locator set to...

C-Scope CAT & Genny Padded Carry Bag

Padded carry bag for Cable Avoidance Tools (C.A.T) and Genny/Transmitter range. Can be used with C-Scope, Radiodetection or Leica CAT Range

C-Scope CS880 Buried Cover Locator

The CS880 Metal Cover Locator detects lost or hidden metal objects such as manhole covers and stopcock covers. The CS880 Metal Cover Locator is a purpose-built solution to the problem of finding lost or hidden metal objects in the ground. The CS880...

C-Scope CS880 Carry Bag

C-Scope CS880 Carry Bag

C-Scope CXL3 Standard CAT

Frequencies: 33kHz Depth: No Warranty: 3 Years Datalogging: No GPS Datalogging: No The C.Scope CXL3 Cable Avoidance Tool is a robust and affordable industry standard locator used to detect buried pipes and cables prior to excavation. Hitting and...

C-Scope CXL4 Standard Cable Locator - Strike Alert

Frequencies: 33 + 131kHz Depth: No Warranty: 3 Years Datalogging: No GPS Datalogging: No The CXL4 Cable Avoidance Tools from C.Scope represent a significant advance in cable detecting performance. Three versions of the CXL4 are available; the...

C-Scope CXL4-D Cable Locator - Datalogging & Strike Alert

Frequencies: 33 + 131kHz Depth: Yes Warranty: 3 Years Datalogging: Yes GPS Datalogging: No The CXL4 Cable Avoidance Tools from C.Scope represent a significant advance in cable detecting performance. Three versions of the CXL4 are available; the...

C-Scope CXL4-DBG Cable Locator - GPS, Datalogging & Strike Alert

Frequencies: 33 + 131kHz Depth: No Warranty: 3 Years Datalogging: Yes GPS Datalogging: Yes The CXL4 Cable Avoidance Tools from C.Scope represent a significant advance in cable detecting performance. Three versions of the CXL4 are available; the...

C-Scope Duct Sonde 33kHz

The C.Scope 33KHz Duct Sonde is a small battery powered transmitter which can be screwed onto the end of a duct rod and inserted and fed into a a duct or conduit. The direction of the duct or conduit can then be traced by a C.Scope locator set to...

C-Scope DXL3 Standard CAT - Depth

Frequencies: 33kHz Depth: Yes Warranty: 3 Years Datalogging: No GPS Datalogging: No The C.Scope CXL3 Cable Avoidance Tool is a robust and affordable industry standard locator used to detect buried pipes and cables prior to excavation. Hitting and...

C-Scope DXL4-D Cable Detector - Data Logging, Depth, & Strike Alert

Frequencies: 33 + 131kHz Depth: Yes Warranty: 3 Years Datalogging: Yes GPS Datalogging: No The DXL4 Cable Avoidance Tools from C.Scope represent a significant advance in cable detecting performance. Two versions of the DXL4 are available; the...

C-Scope DXL4-DBG Cable Detector - GPS, Data Logging, Depth & Strike Alert

Frequencies: 33 + 131kHz Depth: Yes Warranty: 3 Years Datalogging: Yes GPS Datalogging: Yes The DXL4 Cable Avoidance Tools from C.Scope represent a significant advance in cable detecting performance. Two versions of the DXL4 are available; the...

C-Scope General Purpose Sonde 33kHz

A C.Scope 33kHz General Purpose Sonde is a small battery powered transmitter hermetically sealed in a robust torpedo shaped case which which can be screwed onto the end of a drain rod and fed into a pipe. The pipe direction can be then be traced using a...

C-Scope General Purpose Sonde 8kHz

A C.Scope 8kHz General Purpose Sonde is a small battery powered transmitter hermetically sealed in a robust torpedo shaped case which which can be screwed onto the end of a drain rod and fed into a pipe. The pipe direction can be then be traced using a C...

C-Scope Large Carry Bag

Carry bag for Cable Avoidance Tools (C.A.T) and Genny/Transmitter range. Can be used with C-Scope, Radiodetection or Leica CAT Range

C-Scope Live Plug Connector

Genny live plug connector (LPC) is used to easily apply a Genny signal to a street distribution cable using a standard mains socket. Compatible with Radiodetection, C-Scope, Leica & Cable Detection.

C-Scope M-Scan Magnetometer

The M-Scan is a battery powered Locator manufactured in heavy-duty, high-impact ABS with a robust aluminium sensor tube. It has a large, easy-to-read LCD, showing battery level, signal strength and polarity indication backed up with a clear audible...

C-Scope Metal Pipe Sonde 512Hz

To address the problems of detecting the position of a blockage or other relevant feature within a metal pipe, the C.Scope Metal Pipe Sonde is specially designed with a low frequency signal output that is capable of being transmitted through the metal...

C-Scope Metal Pipe Sonde 640Hz

To address the problems of detecting the position of a blockage or other relevant feature within a metal pipe, the C.Scope Metal Pipe Sonde is specially designed with a low frequency signal output that is capable of being transmitted through the metal...

C-Scope MXL4-D Multi Frequency Detector - Data Logging, Depth & Strike Alert

Frequencies: 33kHz, 131kHz, 8kHz, 512kHz, 640kHz Depth: Yes Warranty: 3 Years Datalogging: Yes GPS Datalogging: No The MXL4 Precision Locator represents a significant advance in cable detecting and tracing capabilities. Two versions of the MXL4 are...

C-Scope MXL4-DBG Multi Frequency Detector - GPS, Data Logging, Depth & Strike Alert

Frequencies: 33kHz, 131kHz, 8kHz, 512kHz, 640kHz Depth: Yes Warranty: 3 Years Datalogging: Yes GPS Datalogging: Yes The MXL4 Precision Locator represents a significant advance in cable detecting and tracing capabilities. Two versions of the MXL4...

C-Scope MXT4-D Multi Genny - Muti Frequencies & Data Logging

Frequencies: 33kHz, 131kHz, 8kHz, 512Hz, 640Hz Warranty: 3 Years Datalogging: Yes The C.Scope MXT4 Transmitter is designed for use alongside an MXL4 Locator. It enables a far more flexible approach to pipe and cable location enabling the operator to...

C-Scope SD100 Security Metal Detector

Hand held metal detector for security applications

C-Scope SGA3 Standard Genny 33kHz

Frequencies: 33kHz Warranty: 3 Years Datalogging: No The C.Scope SGA3 is an affordable Signal Generator designed for use alongside a CXL3 or DXL3 Cable Avoidance Tool to make the task of cable avoidance far more effective. The C.Scope SGA3 will...

C-Scope SGA4 Standard Genny 33+131kHz

Frequencies: 33 + 131kHz Warranty: 3 Years Datalogging: No The C.Scope SGA4 is an affordable Signal Generator designed for use alongside a CXL4 or DXL4 Cable Avoidance Tool. It enables significantly more underground utilities to be detected including...

C-Scope SGV4-D Standard Genny 33+131kHz with Data Logging

Frequencies: 33 + 131kHz Warranty: 3 Years Datalogging: Yes The C.Scope SGV4 Signal Generator is designed for use alongside a CXL4 or DXL4 Cable Avoidance Tool. It enables significantly more underground utilities to be detected including street...

C-Scope Signal Clamp 4" 100mm

This clamp is used to apply a Genny signal to a specific cable or pipe. This is particularly useful where direct connection is not possible, or on live cables when these cannot be de-energized.Available in 50mm (2"), 100mm (4"), 130mm (5") and 215mm (8...

C-Scope Spring Coupling for Sondes

Spring coupling for use with signal sonde. Reduces stress on sonde when pushing around pipe bend.

Delta Plus AM002 Screw Lock Karabiner

Delta Plus AM002 Screw Lock Karabiner  Opening 17mm EN362 Suitable for: Agriculture Construction Craftsman Light Industry Heavy Industry Oil / Gas Wind Industry Mining Services

Delta Plus AM022X2 Scaffold Hook

Delta Plus AM022X2 Scaffold Hook  Automatic hook lock in galvanized steel Large opening 55mm Eye hook R>20kN EN362   Suitable for: Agriculture Construction Craftsman Light Industry Heavy Industry Oil / Gas

Delta Plus AN213200CDD Double Hook Fall Arrester Lanyard

Delta Plus AN213200CDD Double Scaffold Hook Fall Arrest Lanyard Fall arrest lanyard in double lanyard webbing EN355, EN362 Suitable for: Construction Craftsman Light Industry Logistics Services Wind Energy   Inspection Certificates...

Delta Plus AN218RCDD Double Clip Fall Arrestor

Delta Plus AN218RCDD Adjustable Double Clip Fall Arrest Lanyard Fall arrest lanyard in double braided rope 12mm. Adjustable by means of two gear rings on the rope.  EN355, EN362 Suitable for: Construction Craftsman Light...

Delta Plus AN315 10m Safety Rope 14mm

Delta Plus AN315 10m Safety Rope 14mm EN353-2, EN362 Suitable for: Construction Craftsman Light Industry Heavy Industry Oil / Gas Wind Industry Services   Inspection Certificates supplied

Delta Plus AN317 20m Safety Rope 14mm

Delta Plus AN317 20m Safety Rope 14mm EN353-2, EN362 Suitable for: Construction Craftsman Light Industry Heavy Industry Oil / Gas Wind Industry Services   Inspection Certificates supplied

Delta Plus AN319 30m Safety Rope 14mm

Delta Plus AN319 30m Safety Rope 14mm EN353-2, EN362 Suitable for: Construction Craftsman Light Industry Heavy Industry Oil / Gas Wind Industry Services   Inspection Certificates supplied

Delta Plus Ascord AN060 Fall Arrestor

Delta Plus AN060 Fall Arrestor Fall arrestor sliding on anchorage line stranded rope. 14mm. Opening type fall arreser equipment with automatic locking, non-inverting device, energy absorber with fall indicator. 1 carabiner included. EN353-2,...

Delta Plus Cameleon AN066 Fall Arrestor

Delta Plus AN066 Fall Arrestor 3 multi functions in 1: 1. Sliding fall arrestor on braided rope anchorage line 10.5mm 2. Stopper on rope: The rope's adjusting device used in the safety bracket (type A) accompanies the user during his changes of...

Delta Plus Descord TC006 Descender

Delta Plus TC006 Descender Self locking descender with double security (anti-panic system) in aluminium, Intended for works on braided rope 9-12mm EN341, Class A EN12841, Type C Suitable for: Agriculture Construction Craftsman Heavy...

Delta Plus ELARA140 VERTICAL & HORIZONTAL Kit

Delta Plus ELARA140 VERTICAL & HORIZONTAL Kit  HAR12 Harness. 2 fall arrestor anchorage points (back - front). 2 adjustment loops. Self Retractable Fall Arrester with 46mm strap wooth energy absorber. Protection case, 1 connector EN361,...

Delta Plus ELARA320 POSITIONING & SCAFFOLDING Kit

Delta Plus ELARA320 POSITIONING & SCAFFOLDING Kit  HAR14 Harness with Positioning Belt. 2 fall arrestor anchorage points (back - front). 2 adjustment loops. Positioning Belt. Fall Arrest Energy Absorber in double stranded rope (12mm)...

Delta Plus EX120 Work Positioning Belt

Delta Plus EX120 Positioning Belt Themoformed back. 2 lateral anchorage points for work positioning. 1 adjustmment loop. sponge back lining  EN358 Suitable for: Construction Craftsman Light Industry Services   Inspection...