This clamp is used to apply a Genny signal to a specific cable or pipe. This is particularly useful where direct connection is not possible, or on live cables when these cannot be de-energized.
Available in 50mm (2"), 100mm (4"), 130mm (5") and 215mm (8.5") diameters.
Compatible with Radiodetection, C-Scope, Leica & Cable Detection.
Radiodetection
| One Watt Power |  Yes |
| Power Levels | 2 |
| - 33+131kHz | Connected at 33+131kHz |
| - 131kHz |
 No |
| - 33kHz | Yes |
| - 8kHz |
No |
| - 512kHz |
No |
| - 640kHz |
No |
| Pulsed/Continuous Output Signal | Yes |
| - Direct Connection | Yes |
| - Wraparound | Yes |
| - Induction | Yes |
| Data Logging |
No |
| Data Transfer via USB |
No |
| Backlit Display |
No |
| Warranty | 1 Year |
| Batteries 3/4 x D (LR20) | Yes |
| In-Build Accessory Tray | Yes |
| IP Rating | IP54 |
| Network Rail Approved | Yes |
Radiodetection
Radiodetection
| Power | Yes |
| Radio | Yes |
| Genny 33kHz | Yes |
| All Scan | Yes |
| Depth | Yes |
| Strike Alert | Yes |
| Datalogging | Yes |
| Swing | Yes |
| GPS | Yes |
| Current Measurement |
No |
| Bluetooth | Yes |
| 640kHz |
No |
| 512kHz |
No |
| 131kHz |
No |
| 33kHz | Yes |
| Warranty | 1 Year |
| Network Rail Approved | Yes |
