Overview
Four times more visible to the human eye than a red beam laser the Spectra HV302G has a visible working range of up to 75m making it perfect for interior applications including suspended ceiling installation, raised floors, internal walls, site levelling & squaring / layout applications.
The laser can be used vertically or horizontally. It also features a split beam which enables plump point transfer and 90 degree setting out of your site.
Whether you are mounting the laser onto a tripod or onto the Spectra wall mount you can access the lasers menu from the keypad or the RC402N remote control.
With a robust design and a IP66 rating the HV302G is also suited to exterior use.
The HV302 has an instrument height alert function, the unit will stop rotating if it is disturbed on site, eliminating costly errors.
When in use with the HL760U receiver you can access the HV302G’S grade match and planeLok function, the laser and the receiver can also be paired so that the HL760U will ignore beams from other lasers on site.
Grade Match – Using the RC402N remote control and your receiver you can access the grade match feature. The laser will scan up and down in the Y axis to find the receiver which you have set up at the desired height once the laser has found the receiver it will set itself to the desired slope.
PlaneLok – This feature allows you to lock the laser beam in alignment with a target point.
HV302G Specification
Operating range – 800M (400m in each direction)
Accuracy ±1.5mm over 30m
Power – Spectra Q104234 10,000 MAH battery pack or 4x Dcell batteries.
Battery life – up to 30hrs with the battery pack or 25hrs with 4x Dcell batteries.
Rotation Speed – 0, 10, 80, 200, 600RPM
IP Rating – IP66
Maximum Grade - ± 10%
Self Levelling Range - ± 5%
Warranty – 3year (laser)
Charging time – Approx. 10hours.
Operating temperature - -20 to 50c
Beam Colour – Green
Laser Source – Class 3
Included in the kit
The Spectra Precision HV302G is supplied with a battery pack, charger, HL760U receiver, C70 clamp, receiver vertical adaptor, RC402N remote control, green laser glasses M302 Wall Mount and a carry case.
Spectra HL760U Receiver
All the same features and specifications of the HL760 however the HL760U detects beams from red beam receivers and green beam receivers.
The Spectra HL760U features a digital readout which gives you an accurate figure in either mm or inches, it also has LED lights showing this which is displayed on 2x LCD screens, one on the front and another on the rear of the HL760U, it has 6 tolerance options and a large detection window of 127mm.
With its rubberised top and bottom casing, IP67 rating and 3-year instant swap out warranty its tough enough for any job site. The anti-strobe feature will help you avoid interference from flashing beacons.
When in use with a compatible Spectra Laser, this receiver has a fingerprint function which allows the HL760U to be paired with the laser level, once paired the receiver will reject beams from other laser levels on site.
With the built in radio function, you can control compatible Spectra laser levels to allow advanced features such as grade match, axis alignment and plane lock.
The Spectra HL760U is compatible with any brand of red beam rotating laser.
HL760U Specification
IP Rating – IP67
Receiver detection range – 127mm
Anti strobe – Yes
Units – mm / cm / inch
Sound – Low, loud & off
Operating time – Up to 70hours
Power – 2x AA battery
Working diameter – 460M
Warranty – 3 years
Precision settings – 6 options - ±0.5mm, 1mm, 2mm, 5mm & 10mm.
Mounting clamp – Spectra C70
LCD – 2 screens, front & back
Audio – 105DB
Beam colour detected – Red / green
Auto Shut off – After 30mins
Spectra RC402N Remote Control
Designed to work with the HV302G interior laser you can access your lasers main menu up to 100m away the remote-controls illuminated LED screen mirrors the screen on the laser level.
Covered by Spectra’s 2-year warranty and with a IP66 rating it was designed for tough site conditions.
Specification
Operating Range – 100m
Power – 2x AA Batteries
Battery Life – up to 130hours
Warranty – 2 Years
IP Raring – IP66
M302 Wall Mount
Supplied with the laser kit as standard the M302 wall mount is designed to be fixed to a wall via screws, or via the clamp on the rear. It has a 5/8’’ thread used to secure the laser.
The height of the laser can also be adjusted whilst in use on the mount.
Tripod Specification
GS18 Aluminium medium weight tripod
Flat top mounting head
Carry shoulder strap
Extending legs with quick release clamps
Head Diameter size – 16cm
Thread size – 5/8’’
Closed length – 97cm
Maximum extended length – 165cm
Weight – 3.2kg
Staff Specification
5m, 5 section Aluminium staff
Comes with a carry sleeve / bag
Clip on bubble provided
Weight – 1.6kg
Closed height – 1.10m
Easy to read graduations.
Front readings.. ‘’E’’ graduations
Rear readings.. MM/CM readings from the bottom up.
Calibration
All our laser levels are calibrated before dispatch and are provided with a calibration certificate valid for 12months. Sealand Survey Centre are a Spectra approved service centre and are certified to carry out repairs on the full range of Spectra products.