Overview
The LL100N is easy to use, simply mount onto a tripod, press the on button and the laser will send a 360° plane of laser light up to 175m away, allowing one person to take accurate, self-levelled elevation measurements with the HR320 laser receiver.
The Spectra LL100N is covered by Spectra’s 2-year warranty, if your laser suffers a failure within its warranty period it will be swapped out for a new one avoiding any downtime.
When paired with the RC601 remote control, you have a single slope feature with the laser. Without the RC601 remote you will not be able to set a slope on this laser.
Should your laser be disturbed on site the laser will stop rotating to avoid any errors.
LL100N Specification
Operating range – 350m (175m in either direction of the laser)
Accuracy - 3mm over 30m
Power –2x D-Cell alkaline batteries.
Battery life – up to 45hrs with the battery pack or 90hrs with 4x D-cell batteries.
Rotation Speed – 600RPM
IP Rating – IP54
Warranty – 2years (laser)
Run Time – 80hours
Operating temperature - -20 to 70c
Laser Source – class 2
Included in the kit
The Spectra Precision LL100N is supplied with 4x D-Cell Alkaline batteries, HR320 Receiver, Clamp and hard carry case.
There is also an option to add on the RC601 remote control.
A tripod & staff can also be added on to your laser level purchase.
Receivers
The Spectra LL100N is supplied with a Spectra HR320 Receiver.
Spectra HR320
The Spectra HR320 is a non-digital laser receiver, it displays a 5 segmented up & down arrow with the dead band on both of its LCD screens, one on the front and one on the rear. With its IP67 rating it is tough enough for any job site.
The Spectra HR320 will work with any brand of red beam laser level.
IP Rating – IP67
Receiver detection range – 50mm
Sound – Low, loud & off
Operating time – Up to 70hours
Power – 2x AA battery
Working diameter – 150M
Warranty – 2 years
Precision settings – 2 options, ±2mm & 6mm
Mounting clamp – Spectra C59
Audio – 95DB
LCD – 2 screens, front & back
Beam colour detected – Red
Auto Shut off – After 30mins
Tripod Specification
GS18 Aluminium medium weight tripod
Flat top mounting head
Carry shoulder strap
Extending legs with quick release clamps
Head Diameter size – 16cm
Thread size – 5/8’’
Closed length – 97cm
Maximum extended length – 165cm
Weight – 3.2kg
Staff Specification
5m, 5 section Aluminium staff
Comes with a carry sleeve / bag
Clip on bubble provided
Weight – 1.6kg
Closed height – 1.10m
Easy to read graduations.
Front readings... ‘’E’’ graduations
Rear readings... MM/CM readings from the bottom up.
Calibration
All our laser levels are calibrated before dispatch and are provided with a calibration certificate valid for 12months. Sealand Survey Centre is a Spectra approved service centre and are certified to carry out repairs on the full range of Spectra products.