Included in the Special Offer
- RL-H5A Rotating Laser Level
- Tripod & Staff
- LS-100D Digital Receiver
Overview
Taking distance and accuracy to the next level, this Topcon RL-H5A laser level is the next generation of self-levelling laser levels for construction. An all-in-one laser level that combines level, tilt and long-range capabilities into one.
Simply press the power button, the RL-H5A will self level and work in seconds, if the laser level is disturbed on site, it will sound an alarm on your receiver. The RL-H5A is accurate to +/- 1.5mm over 30m.
The RL-H5A Laser Level has a range of 800m
When using the re chargeable battery pack the RL-H5A will work continuously for 60hours or 100hours with Alkaline D-Cell batteries, with the RL-H5A’S IP66 rating, it can withstand dust and heavy rain making it a rugged, durable and reliable laser level.
RL-H5A Specification
Operating range – 800m (400m in either direction of the laser)
Accuracy +/- 1.5mm over 30m
Power – Topcon BT-79Q rechargeable 7000mAh, NI-MH battery pack
Battery life – Up to 60hrs with the battery pack or 100hrs with 4x D cell batteries.
Rotation Speed – 600RPM
IP Rating – IP66
Warranty – 5year (laser)
Charging time – Approx. 13hours.
Operating temperature - -20 to 50 degrees
Laser Source – Class 2
LS-100D
The Topcon LS-100D features a digital readout which gives you an accurate figure in either mm, cm or inches. This is displayed on 2x LCD screens, one on the front and another on the rear of the LS-100D, it has 5 tolerance options.
When in use with a Topcon laser level the LS-100D will display if the laser battery is low or if the laser has been disturbed. The LS-100D receiver also has a anti strobe feature to avoid interference from beacons on site.
LS-100D Specification
IP Rating – IP67
Receiver detection range – 90mm
Anti strobe – Yes
Units – mm / cm / inch
Sound – Low, loud & off
Operating time – Up to 45hours
Power – 1x AA battery
Working diameter – 800M
Warranty – 1 year
Precision settings – 5options - +/- 0.5mm, 1mm, 2mm, 5mm & 10mm
Mounting clamp – Topcon Holder-110
LCD – 2 screens, front & back
Beam colour detected – Red
Auto Shut off – After 30mins
Tripod Specification
GS18 Aluminium medium weight tripod
Flat top mounting head
Carry shoulder strap
Extending legs with quick release clamps
Head Diameter size – 16cm
Thread size – 5/8’’
Closed length – 97cm
Maximum extended length – 165cm
Weight – 3.2kg
Staff Specification
5m, 5 section Aluminium staff
Comes with a carry sleeve / bag
Clip on bubble provided
Weight – 1.6kg
Closed height – 1.10m
Easy to read graduations.
Front readings.. ‘’E’’ graduations
Rear readings.. MM/CM readings from the bottom up.
Calibration
All of our laser levels are calibrated before dispatch and are provided with a calibration certificate valid for 12months. Sealand Survey Centre are a Topcon approved service centre and are certified to carry out repairs on the full range of Topcon product’s.
No 
Yes 
