Overview
Replacing Topcon’s reliable and popular RL-SV2S the RL-HV2S has maintained its reliability with more great features.
If you need a laser for single slope, dual slope, vertical and horizontal applications, the RL-HV2S has got you covered.
It has 2 rotation speed options, 300RPM or 600RPM
The RL-HV2S can do a single slope up to ±8% and a dual slope of ±7% When used with a laser grade adaptor the RL-HV2S can achieve a single grade of up to 15%.
With the new easy to use Topcon Laser Manager App (compatible with IOS and Android), you can input grades, switch the laser into standby mode, blank out the lasers windows so not to interfere with other laser receivers all from your mobile phone via Bluetooth.
The Topcon RL-HV2S has a working range of 800m, is accurate to ±1.5mm over 30m, it has a battery life of 65hours when in use with the rechargeable battery pack or 120hours with alkaline batteries.
With its IP66 rating it can withstand dust and heavy rain
It is also covered by Topcon’s 5year warranty.
RL-HV2S Specification
Operating range – 800m (400m in either direction of the laser)
Accuracy ±1.5mm over 30m
Power – Topcon BT-79Q 7000mAh, NI-MH battery pack.
Battery life – up to 65hours with the BT-79 battery pack or 120 with 4x D cell batteries
Rotation Speeds – 300RPM / 600RPM
IP Rating – IP66
Warranty – 5year (laser)
Charging time – Approx. 13hours.
Operating temperature - -20 to 50c
Bluetooth range – 100m
Grade Range X axis - ±8%
Grade Range Y axis - ±8%
Laser Source – Class 1
Included in the kit
The Topcon RL-HV2S comes with a hard carry case, AD-17 charger, your choice of receiver and a clamp. A tripod & staff can also be added on to your laser level purchase.
Receivers
The Topcon RL-HV2S can be purchased with a choice of 2 receivers, the LS-80X or the LS-100D.
LS-80X
The Topcon LS-80X is a non-digital laser receiver which displays up & down arrows and a dead band on both of its LCD screens, one on the front and one on the rear. With its IP66 rating it is tough enough for any job site.
When in use with a Topcon laser level the LS-80X will display if the laser has been disturbed.
IP Rating – IP66
Receiver detection range – 50mm
Sound – Low, loud & off
Operating time – Up to 120hours
Power – 2x AA battery
Working diameter – 800M
Warranty – 1 year
Precision settings – 2 options, ±1mm & 2mm
Mounting clamp – Topcon Holder-6
LCD – 2 screens, front & back
Beam colour detected – Red
Auto Shut off – After 30mins
LS-100D
The Topcon LS-100D features a digital readout which gives you an accurate figure in either mm, cm or inches. This is displayed on 2x LCD screens, one on the front and another on the rear of the LS-100D, it has 5 tolerance options.
When in use with a Topcon laser level the LS-100D will display if the laser battery is low or if the laser has been disturbed. The LS-100D receiver also has a anti strobe feature to avoid interference from beacons on site.
LS-100D Specification
IP Rating – IP67
Receiver detection range – 90mm
Anti strobe – Yes
Units – mm / cm / inch
Sound – Low, loud & off
Operating time – Up to 45hours
Power – 1x AA battery
Working diameter – 800M
Warranty – 1 year
Precision settings – 5options - ±0.5mm, 1mm, 2mm, 5mm & 10mm
Mounting clamp – Topcon Holder-110
LCD – 2 screens, front & back
Beam colour detected – Red
Auto Shut off – After 30mins
Tripod Specification
GS18 Aluminium medium weight tripod
Flat top mounting head
Carry shoulder strap
Extending legs with quick release clamps
Head Diameter size – 16cm
Thread size – 5/8’’
Closed length – 97cm
Maximum extended length – 165cm
Weight – 3.2kg
Staff Specification
5m, 5 section Aluminium staff
Comes with a carry sleeve / bag
Clip on bubble provided
Weight – 1.6kg
Closed height – 1.10m
Easy to read graduations.
Front readings... ‘’E’’ graduations
Rear readings... MM/CM readings from the bottom up.
Calibration
All our laser levels are calibrated to manufacture specification before dispatch and are provided with a calibration certificate valid for 12months. Sealand Survey Centre is a Topcon approved service centre and are certified to carry out repairs on Topcon products.
Yes 
No 
