Overview
The automatic self-levelling Spectra Precision GL1425C dual grade laser is our most popular it does three jobs—level, grade, and vertical alignment. Even in harsh jobsite conditions, the GL1425C delivers consistently reliable and accurate performance, enabling you to work faster and smarter.
The GL1425C has Bluetooth built in so it can work with the simple to use Spectra Laser Remote App meaning you can access the lasers menu from your smart phone. The app is available on apple and android devices.
The lasers menu can be accessed via the keypad on the laser itself, the RC1402 remote control or via your smart phone.
To avoid interference with other laser levels on site the GL1425C the laser windows can be blanked out on up to 3 windows (mask mode) you can also pair it with the HL760 receiver the receiver will then ignore beams from other lasers on site.
No more manually setting grades. Using the RC1402 remote control and your receiver you can access the grade match feature. The laser will scan up and down in the Y axis to find the receiver which you have set up at the desired height once the laser has found the receiver it will set itself to the desired slope.
The GL1425C has options for receivers. The advanced HL760 Digital Readout receiver provides automatic Grade Match which allows measurement of unknown grade values between two points over unknown ground and eliminates time consuming slope calculations. PlaneLok automatically locks on to an existing elevation or vertical alignment point. The CR700 receiver is also an option when a machine mounted display elevation is required.
With a 5/8’’ thread mounted on the bottom and rear of the laser it is suited to both horizontal and vertical applications.
GL1425C Specification
Operating range – 800m (400m in either direction of the laser)
Accuracy ±1.5mm over 30m
Power – Spectra B10 rechargeable 10000mAh, NI-MH battery pack or 4x Dcell batteries.
Battery life – up to 45hrs with the battery pack or 75hrs with 4x Dcell batteries.
Rotation Speed – 300RPM, 600RPM, 900RPM
IP Rating – IP66
Maximum Grade - ±9%
Warranty – 5year (laser)
Charging time – Approx. 10hours.
Operating temperature - -20 to 50c
Laser Source – class 2
Included in the kit
The Spectra Precision GL1425C is supplied with a B10 battery pack, CH10 charger, HL760 receiver, C70 clamp, RC1402 remote control and a carry case.
You have a choice of receiver both are supplied with a clamp
Receiver
The Spectra GL1425C can be purchased with a choice of receiver, the HL760 or Spectra CR700, there is also an option to buy both receivers this will enable you to have the CR700 on your machine and the HL760 as a in cab display.
Spectra HL760
The Spectra HL760 features a digital readout which gives you an accurate figure in either mm or inches, it also has LED lights showing This is displayed on 2x LCD screens, one on the front and another on the rear of the HL760, it has 6 tolerance options. And a large detection window of 127mm.
With its rubberised top and bottom casing, IP67 rating and 3-year instant swap out warranty its tough enough for any job site. The anti-strobe feature will help you avoid interference from flashing beacons.
When in use with a compatible Spectra Laser this receiver has fingerprint function, this allows the HL760 to be paired with the laser level once paired the receiver will reject beams from other laser levels on site.
With the built in radio function you can control compatible Spectra laser levels to allow advanced features such as grade match, axis alignment and plane lock.
The Spectra HL760 is compatible with any brand of red beam rotating laser.
HL760 Specification
IP Rating – IP67
Receiver detection range – 127mm
Anti strobe – Yes
Units – mm / cm / inch
Sound – Low, loud & off
Operating time – Up to 70hours
Power – 2x AA battery
Working diameter – 460M
Warranty – 3 year
Precision settings – 6 options - ±0.5mm, 1mm, 2mm, 5mm & 10mm.
Mounting clamp – Spectra C70
LCD – 2 screens, front & back
Audio – 105DB
Beam colour detected – Red
Auto Shut off – After 30mins
Spectra CR700 Machine Receiver
Supplied with a strong magnetic clamp and a staff clamp the CR700 can be used on your excavator or your staff.
The Spectra CR700 features a digital readout which gives you an accurate figure in either mm or inches, it also has 3 bright LED lights. This is displayed on 2x LCD screens, one on the front and another on the rear of the CR700, it has 6 tolerance options. And a large detection window of 270mm.
With its rubberised top and bottom casing, IP67 rating and 3-year instant swap out warranty its tough enough for any job site. The anti strobe feature will help you avoid interference from flashing beacons.
When in use with a compatible Spectra Laser this receiver has fingerprint function, this allows the HL760U to be paired with the laser level once paired the receiver will reject beams from other laser levels on site.
With the built in radio function you can control compatible Spectra laser levels to allow advanced features such as grade match, axis alignment and plane lock.
The CR700 receiver can also be paired to a Spectra HL760 your HL760 will then become a remote display mirroring the CR700’s screen.
The Spectra CR700 is compatible with any brand of red beam rotating laser.
CR700 Specification
IP Rating – IP67
Receiver detection range – 270mm
Anti strobe – Yes
Units – mm / cm / inch
Sound – Low, loud & off
Operating time – Up to 60hours
Power – 3x AA battery
Working diameter – 460M
Warranty – 3 years
Precision settings – 6 options - +/- 0.5mm, 1mm, 2mm, 5mm, 10mm & 25mm
Mounting clamp – Spectra C71 magnetic clamp & C70 staff clamp
LCD – 2 screens, front & back
Audio – 110DB
Beam colour detected – Red
Auto Shut off – After 30mins
Spectra RC1402 Remote Control
Designed to work with the Spectra GL1425C dual grade laser you can access your lasers main menu up to 100m away the remote-controls illuminated LED screen mirrors the screen on the laser level.
Covered by Spectra’s 2-year warranty and with a IP66 rating it was designed for tough site conditions.
Specification
Operating Range – 100m
Power – 2x AA Batteries
Battery Life – up to 130hours
Warranty – 2 Years
IP Raring – IP66
Tripod Specification
GS18 Aluminium medium weight tripod
Flat top mounting head
Carry shoulder strap
Extending legs with quick release clamps
Head Diameter size – 16cm
Thread size – 5/8’’
Closed length – 97cm
Maximum extended length – 165cm
Weight – 3.2kg
Staff Specification
5m, 5 section Aluminium staff
Comes with a carry sleeve / bag
Clip on bubble provided
Weight – 1.6kg
Closed height – 1.10m
Easy to read graduations.
Front readings.. ‘’E’’ graduations
Rear readings.. MM/CM readings from the bottom up.
Calibration
All our laser levels are calibrated before dispatch and are provided with a calibration certificate valid for 12months. Sealand Survey Centre are a Spectra approved service centre and are certified to carry out repairs on the full range of Spectra products.
Yes 
No 
