Included in the Special Offer
Spectra LR60W
Spectra MM1 magnetic mount
Spectra LR60W machine receiver
The spectra LR60W laser machine receiver is designed to be used on grading and excavating equipment including dozers, excavators, backhoes, skid steers, scrapes and box blades.
The LR60W comes with a 2 year warranty. It has a IP67 rating meaning it is fully waterproof and has internal isolating shock mounts which protect the electronics.
The LR60W is designed to be used with the spectra RD20 wireless is cab display this provides an in-cab display of elevation and audio, as well as the in-cab display this information can be seen on the LR60W with its bright LED lights.
It is compatible with all red beam laser levels.
It has two built in clamps designed to attach to spectra’s MM-1 magnetic mount or the DM20 bolt on mast.
You have the choice of 4 accuracy settings to meet the job site requirements from rough grading (40mm) to fine grading (5m) the LR60W also has a built in plumb indicator for fast, accurate grade checking. Should you be working on a job site with less undercuts the LR60W allows you to offset the grade allowing more above grade information.
The LR60W also has a battery level LED indicator so you know when your battery is getting low, the battery indicator will begin flashing when the receiver has approximately 90 minutes battery life remaining. Once the battery levels are too low to operate the LED will remain on.
Spectra LR60W machine receiver specification
Warranty – 2 years
Runtime – up to 50 hours
IP rating – IP67
Display channels – 9
Power – 4x rechargeable batteries or 4x C-cell alkaline batteries
Charge time – 4 hours
Beam reception range – 360 degrees
Automatic shut off- 75 mins with no laser beam
Operating temperature - -20 - +60
Operating range – 460m
Beam colour detected – Red
Accuracy settings – 4 – 5mm/10mm/20mm/40mm
Detection window size – 220mm
Spectra MM1 magnetic mount
This magnetic machine receiver mount is compatible with all LR30/50/60 rang of spectra machine receiver. Topcon machine receivers can also be used with this mount.
This mount is designed to quickly clamp onto this excavator dipper arm. Your machine receiver will then clamp onto the mount.
It has 2 very strong non-slip magnets and a release leaver to assist with removing from the machine, the magnets are also adjustable so it can be positioned around hoses or piping on the excavator.
Spectra MM1 magnetic mount Specification
Length – 860mm
Useable length – 740mm
Tube diameter – 42mm
Magnet face size – 165mm x 70mm
Weight – 4.5kg
SKU – MM-1
Yes 
No 
