3DMC Max Mastless Dozer System 3DMC Version 15

Topcon

Please call 01244 821 777 for pricing

(No reviews yet) Write a Review

3DMC Max Mastless Dozer System 3DMC Version 15

The 3D-MC Max Dozer system with software version 15 of 3DMC has been designed with maximum productivity in mind. A mastless system that houses two GNSS receivers on top of the cab, eliminating the need for receivers fixed to masts on the blade. This not only reduces the risk of injury while installing antennas but reduces downtime caused by damages and recalibrations.

Utilising industry leading IMU sensors on the blade and body and Topcon’s latest 3D-MC software, these give the MC Max an edge over other GPS Dozer Systems by delivering superior accuracy, speed and control when grading on level ground and steep slopes.

Featuring the bright and vivid touchscreen GX series display, a 4G modem and radio for communications between the network and/or onsite base station and an MC-R3 control box along with the receivers and IMU sensors, the 3D-MC Max Dozer system is ideal for the most demanding environments whether its final grading, batters or bulk earthworks.

Cab Kit Components

  • GX-55 or GX-75 Touchscreen
  • GR-i3 GNSS Receivers x 2
  • MC-X3 Communication Box (UHF Radio, Wifi and 4G Cellular modem)

Wiring Kit Components

  • IMU sensors (Qty depending on blade type)
  • Wiring harness with CAN port (dozer specific)
  • Screen mount (dozer specific)
  • Main and Aux GPS CAN cables
  • Tilt sensor CAN cables
  • Sensor weld plates
  • GPS antenna mounts (dozer specific)
  • Diversity antenna (4G / Wifi / Radio)

Topcon Sitelink online data transfer and remote access platform

Sitelink is Topcon’s online, cloud based data management and remote access platform.

To access Sitelink, users must first create a free MyTopcon account at www.topconpositioning.com.

Topcon machine control systems are supplied with a Topcon data sim. Once activated, these sim cards allow for network connection and can be paired to Sitelink for remote access and file transfer (for more info on this contact us) Sitelink connectivity is currently run on a points basis. Points can be purchased from your local dealer and activated on My Topcon. Once Sitelink points have been activated, the Sitelink App will be accessible, and a unique support desk connection number provided.

Once your account is set up, data loaded to the online site can be synchronised to all Topcon machine control and Field Controllers. Tasks can be set for set regions or individual machines with updated design synchronisation, so everyone has the same data, therefore avoiding delays or costly mistakes.

Topo survey data can be recorded by individual machines or recorded on a layer set to be updated by all machines. This data can then be synchronised to Sitelink and downloaded for quality control or used to monitor progress.

Sitelink can host a whole range of design formats to upload to the machine, such as TP3, TN3, LN3, GC3, DXF, DWG, LandXML, CSV, and TXT (Text)

For further information on Sitelink including how to setup your account please see (LINK)

Software features

  • 2D and 3D view of surfaces and layers (version 15.1.9)
  • Upload surfaces and layers by USB - TP3 (Topcon Project file), TN3 (Surface), LN3 (Linework) and GC3 (Localisation)
  • Upload data remotely through Sitelink – AutoCAD, DWG, DXF, LandXML, TP3, TM3, LN3, GC3.
  • Vertical and horizontal guidance
  • Programable screen views
  • Steer to polyline guidance
  • Create vertical and horizontal offsets
  • Create surfaces and layers from the cab
  • Carry out surveys using the machine
  • Create surfaces from topo survey data
  • Built in horizontal and vertical screen LED’s for easy guidance

Uses

Bulk Earthworks, grading

Current Software version

3DMC V15.1.9

It is important that the software, firmware and operating system are kept up to date. Failure to do so can affect the systems performance. For more information on updates please contact us.

Available upgrades

LPS Total Station – Requires an activation to the MC-X3. An additional prism mount is added to the calibration file for the location of the 360 prism. Once setup, users can switch between GPS and LPS from the in-cab screen.

Notes

Topcon XMAX running 3DMC V15 is only suitable for use on the GEN2 versions of the GX-55 and GX75 screens.

GX55 GEN1 screen serial number prefix 1400. GEN2 screen prefix 5555.

GX75 GEN1 screen serial number prefix GEN2 screen prefix 5555.

Notes

The Mast system is not upgradable to XMAX as it would require a new wiring loom, IMU sensors and cab mounts for the receivers. The Cab Kit has also been upgraded with the antennas being replaced by the GR-i3 Receivers and the MC-R3 being replaced by the MC-X3.

Related Products