Topcon I Series Excavator System 3DMC Version 13
A tried-and-true 3D Machine Control system, the I-Series is one of the most robust and reliable GPS systems for Excavators on the market. Although a Legacy product from Topcon, it is still fully supported by Sealand Survey Centre and continues to be widely used in the construction industry.
Operating with a series of tilt sensors fitted to the body, boom, stick and dog bone, two GNSS receivers, an external Satel radio, a rugged touchscreen control box and the MC-i4 modem for Sitelink 3D capabilities thanks to the internal 4G Cellular modem, GNSS processing and optional Bluetooth or UHF Radio from its 4th port. The I-series is a great choice for 3D Machine control. Able to work off the network via Sim-card and from an on-site base station via its radio connection.
The I-Series running Version 13 of 3DMC software allows for precise and efficient works, getting to grade faster and helping reduce over dig. The operator can see exactly where they are on site on the GX series screen, helping to avoid mistakes and ensuring the job is done right first time, every time.
Cab Kit Components
- GX-55 or GX-75 Touchscreen – Running Windows XP and 3DMC Software
- MC-i3 or MC-i4 Modem (GNSS Processors, 3/4G Cellular Modem, optional BT or UHF Radio from 4th port on MC-i4)
- Satel UHF External Radio
- 2 x PG-S3 GNSS Antennas
Wiring Kit Components
- 4 x TS-i3 sensors
- Wiring harness (I Series specific)
- Window mount for screen
- GNSS Antenna cables
- Tilt sensor CAN cables
- Sensor weld plates
- GPS antenna mounts (posts or boxing ring mounts)
- 4G antenna
- Radio whip antenna
Tilt rotate compatibility
The I Series is compatible with Rototilt, Steelwrist, Engcon
If enabled by the tilt rotator manufacture, the I series will read the attachments rotation sensor information via a CAN connection. An additional Topcon tilt sensor will be required to provide tilt information.
Topcon Sitelink online data transfer and remote access platform
Sitelink is Topcon’s online, cloud-based data management and remote access platform.
To access Sitelink, users must first create a free MyTopcon account at www.topconpositioning.com.
Topcon machine control systems are supplied with a Topcon data SIM. Once activated, these SIM cards enable network connectivity and can be paired with Sitelink for remote access and file transfer (for more info on this, contact us). Sitelink connectivity is currently run on a per-point basis. Points can be purchased from our website and activated on My Topcon. Once Sitelink points have been activated, the Sitelink App will be accessible, and a unique support desk connection number will be provided.
Once your account is set up, data loaded to the online site can be synchronised to all Topcon machine control and Field Controllers. Tasks can be set for specific regions or individual machines, with updated design synchronisation, so everyone has the same data, thereby avoiding delays or costly mistakes.
Topo survey data can be recorded by individual machines or recorded on a layer set to be updated by all machines. This data can then be synchronised to Sitelink and downloaded for quality control or used to monitor progress.
Sitelink3D supports a range of Topcon, CAD and industry-standard design formats, including:
- TP3 – Topcon project file.
- TN3 – Topcon surface file.
- LN3 – Topcon linework file.
- GC3 – Topcon localisation file.
- DXF.
- DWG.
- LandXML.
- CSV.
- TXT.
For further information about Sitelink3D, account creation and Service Points, please see: [LINK]
Software features
- Upload surfaces and layers by USB - TP3 (Topcon Project file), TN3 (Surface), LN3 (Linework) and GC3 (Localisation)
- Upload data remotely through Sitelink – AutoCAD, DWG, DXF, LandXML, TP3, TM3, LN3, GC3.
- Vertical and horizontal guidance
- Programmable screen views
- Steer to polyline guidance
- Create vertical and horizontal offsets
- Create surfaces and layers from the cab
- Carry out surveys using the machine
- Create surfaces from topo survey data
- Built in horizontal and vertical screen LED’s for easy guidance
Uses
Earthworks, drainage, footings, pond excavations, grading
Current Software version
3DMC V13.100 (last supported version for the I Series)
It is important that the software, firmware and operating system are kept up to date. Failure to do so can affect the systems performance. For more information on updates please contact us.
Available upgrades
2D laser receiver.....
MC-i3's and MC-i4's fitted with 3G modems can be updated to 4G. Please contact us for more info.
Updating the I series to the X Series or XMAX Series requires new sensors, main wiring loom and GNSS cables. It is recommended to replace the full wiring kit if updating. Please contact us for more info.
Notes
Topcon I-Series running 3DMC V13 will work with GEN1 and GEN2 versions of the GX-55 and GX75 screens.
GX55 GEN1 screen serial number preifx 1400. GEN2 screen prefix 5555.
GX75 GEN1 screen serial number prefix 1418. GEN2 screen prefix 5555.
The I Series is not up-gradable to version 15 of 3DMC. Version 15 is designed to work with IMU sensors instead of standard tilt sensors and the X Series / XMAX Hardware.
This product is now classified as a legacy product, meaning that components and spare parts are no longer being manufactured. As a result, support is limited to any remaining new stock and the servicing of existing equipment. We may still be able to repair your equipment, depending on its age, condition, and the availability of the required replacement parts. Looking for used equipment or replacement components? Visit our Reconditioned Equipment page or contact us with your requirements. We may be able to provide a compatible reconditioned or alternative solution.
No 
Yes 
