Topcon X Series Excavator System 3DMC X53X - Version 13
The X Series is the next step up from the I Series. Working from faster tilt sensors, two upgraded GR-i3 GNSS receivers which now have integrated processing boards and Bluetooth capabilities, an SL-100 modem for 4G connection, remotely programmable Satel radio and MC-X1 hub to link all components to the GX55 or 75 Screen.Fully supported for use with Topcon’s Sitelink3D and compatible tilt rotators. The X Series is still a current product but now replaced by the XMAX running IMU sensors and version 15 of 3DMC software.
The X Series is able to work from the network via Sim-card or from an on-site base station via its radio connection.
The X-Series running Version 13 of 3DMC software allows for precise and efficient works, getting to grade faster and helps reduce over dig. The operator can see exactly where they are on site on the GX series screen, helping to avoid mistakes and ensuring the job is done right first time, every time.
Cab Kit Components
- GX-55 or GX-75 Touchscreen – Running Windows XP and 3DMC Software
- SL-100 4G Modem
- MC-X1 (Used to link the system and provides a BT connection for LPS)
- Satel UHF External Radio
- 2 x GR-i3 GNSS Receivers
Wiring Kit Components
- 4 x TS-i3/500 sensors
- Wiring harness (X Series specific)
- Window mount for screen
- GNSS Receiver cables
- Tilt sensor CAN cables
- Sensor weld plates
- GPS antenna mounts (posts or boxing ring mounts)
- 4G antenna
- Radio whip antenna
Tilt rotate compatibility
The X Series is compatible with Rototilt, Steelwrist, Engcon
If enabled by the tilt rotator manufacture, the X series will read the attachments rotation sensor information via a CAN connection. An additional Topcon tilt sensor will be required to provide tilt information.
Topcon Sitelink online data transfer and remote access platform
Sitelink is Topcon’s online, cloud based data management and remote access platform.
To access Sitelink, users must first create a free MyTopcon account at www.topconpositioning.com.
Topcon machine control systems are supplied with a Topcon data sim. Once activated, these sim cards allow for network connection and can be paired to Sitelink for remote access and file transfer (for more info on this contact us) Sitelink connectivity is currently run on a points basis. Points can be purchased from your local dealer and activated on My Topcon. Once Sitelink points have been activated, the Sitelink App will be accessible, and a unique support desk connection number provided.
Once your account is set up, data loaded to the online site can be synchronised to all Topcon machine control and Field Controllers. Tasks can be set for set regions or individual machines with updated design synchronisation, so everyone has the same data, therefore avoiding delays or costly mistakes.
Topo survey data can be recorded by individual machines or recorded on a layer set to be updated by all machines. This data can then be synchronised to Sitelink and downloaded for quality control or used to monitor progress.
Sitelink can host a whole range of design formats to upload to the machine, such as TP3, TN3, LN3, GC3, DXF, DWG, LandXML, CSV, and TXT (Text)
For further information on Sitelink including how to setup your account please see (LINK)
Software features
- Upload surfaces and layers by USB - TP3 (Topcon Project file), TN3 (Surface), LN3 (Linework) and GC3 (Localisation)
- Upload data remotely through Sitelink – AutoCAD, DWG, DXF, LandXML, TP3, TM3, LN3, GC3.
- Vertical and horizontal guidance
- Programmable screen views
- Steer to polyline guidance
- Create vertical and horizontal offsets
- Create surfaces and layers from the cab
- Carry out surveys using the machine
- Create surfaces from topo survey data
- Built in horizontal and vertical screen LED’s for easy guidance
Uses
Bulk Earthworks, drainage, footings, pond excavations, grading
Current Software version
3DMC V13.100 (last supported version for the X Series)
It is important that the software, firmware and operating system are kept up to date. Failure to do so can affect the systems performance. For more information on updates please contact us.
Available upgrades
2D laser receiver – connected through the machines CAN line between the stick and dog bone sensor.
LPS Total Station – Requires an activation to the MC-X1. An additional prism mount is added to the calibration file for the location of the 360 prism. Once setup, users can switch between GPS and LPS from the in-cab screen.
SL-100's fitted with 3G modems can be updated to 4G. Please contact us for more info.
Updating the I series to the X Series or XMAX Series requires new sensors, main wiring loom and GNSS cables. It is recommended to replace the full wiring kit if updating. Please contact us for more info.
Notes
Topcon X-Series running 3DMC V13 will work with GEN1 and GEN2 versions of the GX-55 and GX75 screens.
GX55 GEN1 screen serial number prefix 1400. GEN2 screen prefix 5555.
GX75 GEN1 screen serial number prefix 1418 GEN2 screen prefix 5555.
The X Series is up-gradable to the XMAX and Version 15 of 3DMC. To upgrade to Version 15 the sensors will need to be upgraded from the TSi3 to the TSi4 IMU’s, the MC-X1 Firmware must be upgraded and 3DMC Software must be upgraded from V13 to V15. The MC-X1 requires an OAF activation similar to the 3DMC software activation stored on the screen. For more information on this please contact us.
